Go Bottom

rotary cutter setup

View my Photos
RichM.
Join Date: Jul 2003
Posts: 19 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2003-07-20          59870


Whats the best way to setup rotary cutter? Currently I run the draft down to about 2 and use the position lever to fine tune. Seems there is no happy medium mowing up or down hills always scalp at the top or bottom. Thanks



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



rotary cutter setup

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2003-07-21          59886


Try a set of check chains. They run from the lower links to the top link on the tractor. They will help with over top of the hill but you will still have the bottom to contend with. You might want to try your draft a little lighter as it may help. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login