slt 1554 electronic pto problem
RODCAR48
Join Date: Aug 2006 Posts: 2 MISSISSIPPI |
2006-08-22 133582
I am now having a problem getting the blades to engage properly. When i pull the pto switch on the blades will turn for a few seconds then disengage. Can you help me with troubleshooting this problem?
Reply to | Quote Reply | Add Photo
slt 1554 electronic pto problem
yooperpete
Join Date: Jan 2004 Posts: 1413 Northern Michigan Pics |
2006-08-22 133585
I'm not familiar with that model designation. If it is a lawn and garden tractor, the electronic PTO clutch is out of adjustment. If the gap is too wide (from wear) it typically won't engage. I'm not sure but think the gap is .011". If you take off the grille and side panels you can see 3 bolts that tighten down the clutch. These need to be uniform in height.
I have 782's, 1862 and 1864 models. I had a bad muffler on the 1864 and let it go for a while and it heated up the clutch until it fatiqued and broke. ....
Reply to | Quote Reply | Add Photo
slt 1554 electronic pto problem
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2006-08-22 133599
Chck for loose wires at the`safety switches. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This