Go Bottom

Model 1811 Cub Cadet about a 1988 or 1989

View my Photos
terra3bjc
Join Date: Sep 2018
Posts: 3 PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-09-06          197959


I have a Cub Cadet Hydro-stat that will not go uphill after it is warm, and it will not go up in either direction. It goes ok on the flat. Is there somewhere to check the pressure of this pump, and if so what is it supposed to be. I have a service manual and I went there to look, I found the pump page and it says go to page 2-94 and my manual does not have that page, go figure? Or is there another problem I should be looking at ( maybe linkage), and it seemed to do this like overnight shall I say. Thank you, will wait for an answer. Tom



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Model 1811 Cub Cadet about a 1988 or 1989

View my Photos
Hogslayer
Join Date: Jan 2018
Posts: 45 Northern michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-09-11          197964


The hydro has an oil filter located underneath near the differential. It may be clogged. Is the fluid level low? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Model 1811 Cub Cadet about a 1988 or 1989

View my Photos
terra3bjc
Join Date: Sep 2018
Posts: 3 PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-09-13          197970


Thank you for that info, but I already knew all of that. I am wondering if the governor plate and linkage could cause that, do you know ?? I changed the oil and filter last summer so I am sure it is ok, it was the first thing I checked. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login