Go BottomJM Finish Motor
 | WadeMalphurs
Join Date: May 2011 Posts: 7 Florida 
|
2011-05-11 178415
I recently bought a 2002 Jinma tractor with a 2002 JM rotary finish mower Model #9GX-1.5 and I'm not having any luck finding parts for the mower. The dealer where it was purchased has gone out of business and I can't find parts near or far. Any help would be greatly appreciated.
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
 | greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky 
 Pics
|
2011-05-11 178421
Truthfully, I don't think that dealer would have offered any meaningful parts support either. But Homier sold the thing under their FarmPro label for a while. Perhaps they have an old part or two gathering dust on their shelves. Click on link below
//greg// ....
Link: attachments
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
 | kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina 
Pics
|
2011-05-12 178423
Depending on the part(s) needed you may find another brand will work. My best guess on that would be to take the part needed in with you. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| WadeMalphurs
Join Date: May 2011 Posts: 7 Florida
|
2011-05-12 178431
Thanks but I already tried my local tractor dealer and he said with 34 different kinds of tractors he services he doesn't have anything that looks like that. And my other dealer is for John Deere. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| bogman
Join Date: Aug 2010 Posts: 106 Bogalusa, La.
|
2011-05-12 178432
You might try www.northerntool.com, they sell nortrac equipment which is Jinma by another name. Call the 800 number and get them to connect you to the nortrac service dept. They might have what you need. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| richwaugh
Join Date: Mar 2010 Posts: 96
|
2011-05-13 178435
You didn't say what parts you think you need for or instance, bearings are fairly universal and can be gotten from places like Grainger's, and some special parts can be made by a good metal fabricator, etc. What parts do you need? ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| WadeMalphurs
Join Date: May 2011 Posts: 7 Florida
|
2011-05-13 178436
Thanks I'll try. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| WadeMalphurs
Join Date: May 2011 Posts: 7 Florida
|
2011-05-13 178437
When I bought it, the pulley was welded to the shaft of the blade spindle and no grease fitting on top, so I need all these parts. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto
Pics
|
2011-05-13 178438
Pulleys and blades are widely available. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| richwaugh
Join Date: Mar 2010 Posts: 96
|
2011-05-13 178439
Wade,
The blade spindle(s) may be somewhat proprietary, but I would think that a decent metal worker could cut the pulley off and re-work the spindle end to take a keyed pulley and install a zerk for lubrication. I know I could do it in my shop easily so I'm sure there must be someone near you would do the same. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina
Pics
|
2011-05-13 178446
Depending on your spindle would expect you to be able to find an unit that would fit it. Might require a mounting or adapter plate be made but as has been mentioned local welding/machine shop should have no problem if you are not able to. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky
Pics
|
2011-05-13 178447
I'm sorry, but we're just talkin' about a light duty mower of dubious pedigree - that probably didn't retail for more than $600 before it was pulled off the market for cause. I considered the damn thing disposible from the git-go. If this one needs more than a belt, sell it for scrap metal
//greg// ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| richwaugh
Join Date: Mar 2010 Posts: 96
|
2011-05-13 178449
Wade,
You can get parts for that mower from Affordable Tractor Sales in Texas. I just checked with the owner and he says they have them in stock. You can call him at 979.865.4002 or email him at tommy@affordabletractorsalesco.com and he'll fix you up. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| WadeMalphurs
Join Date: May 2011 Posts: 7 Florida
|
2011-05-13 178455
Man you guy's and this are great I'm gonna keep tryin thanks for the help. ....
Reply to |
Quote Reply |
Add PhotoJM Finish Motor
| rrjosh
Join Date: Jun 2011 Posts: 7 Jonesboro ar
|
2011-06-01 178761
I import this mower and stock a full line of parts would be glad to help with any problems you may have. I don't think I can put info on here so google me at r&r farm equipment Inc Jonesboro ar 72404 please give me a call you will find we are very reasonably priced and eager to help. Thanks Josh ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This