AMT 600 5 wheeler ignition diagram
phdindirt
Join Date: Jul 2010 Posts: 2 nb canada |
2010-07-01 172028
First time here, I hope someone can help.
I have a 5w AMT600 and the ignition came loose and spun. All the wires have broken off.
The switch looks like a "T" with a fat top.
from left to right, top to bottom the wires are
black, broken
red jumper to next terminal,broken
broken
and I have to blacks, one red and one purple.
Thanks for your time!
Reply to | Quote Reply | Add Photo
AMT 600 5 wheeler ignition diagram
gatoraider
Join Date: Nov 2008 Posts: 544 Maryland |
2010-07-02 172050
Holding the switch in your hand looking at the back of it. You have a pin at 11 0'clock by itself, that is red. It jumps to the pin at 12 0'clock in the main cluster, it is red and the other side goes to the harness. Two red wires on 12 o'clock pin. Purple is at 3 0'clock. One black is by itself at 4:30. At 7:30 there are two blacks, one goes to the harness the other goes to a two wire harness that goes to the light switch with an orange, not the orange at 9 o'clock. At 9 o'clock there is a light blue to the harness and an orange that goes to the other side of the light switch. Two wires at 9 o'clock. Hope this helps you out. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This