Go Bottom

Clutch Drive or Belt

View my Photos
msterling
Join Date: Nov 2010
Posts: 3 Murfreesboro, Tn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-11-17          175188


Have an old 4 x 2 and won't move. Feels like its going into gear, so don't think its an actual transmission/gearbox issue. Is there an easy way to determine if its the primary clutch, secondary drive, or belt? Not real familiar with these machines, so any help would be appreciated.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Clutch Drive or Belt

View my Photos
gatoraider
Join Date: Nov 2008
Posts: 544 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-11-18          175214


You can sit still, with the machine in neutral, and rev it and the clutches will shift out like they are supposed to do. If the drive clutch gets bigger and the driven smaller they are working. Sounds like a broken chain in the transaxle, a broken tang on the shift arm inside the transaxle, or something on the input shaft in the transaxle. Transaxles can't be fixed while in the machine, they have to be removed and taken apart. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Clutch Drive or Belt

View my Photos
msterling
Join Date: Nov 2010
Posts: 3 Murfreesboro, Tn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-11-18          175215


Great, thanks for the help. I'll check when I get back home tonight and verify the clutches/drives are working before tearing into the transaxel. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login