Go Bottom

lift cyclinder john deere 90

View my Photos
maggiett
Join Date: May 2011
Posts: 2 salem ark
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-05-17          178521


how do you get apart to put new seal in



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



lift cyclinder john deere 90

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2011-05-18          178524


Do not the ends unscrew? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



lift cyclinder john deere 90

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2011-05-19          178541


I believe by "lift cylinder" they mean the cylinder inside the rear end that lifts the 2 lift arms of the 3pth.

If that's the case, I suspect it's one of those situations where my head of maintenance department would shake his head and say "If you have to ask how to do it, or where to get parts, are you really sure you want to tackle it?".

It means splitting the tractor in half and then going into the back half in a lot of cases.

In some you can get to it by just removing the two outboard axle housings, but even that's still a pretty big (and more than a little dangerous) job.


Best of luck. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



lift cyclinder john deere 90

View my Photos
jdgreen
Join Date: Jul 2003
Posts: 232 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-05-19          178549


When you say model 90, is that a skid steer or a boom mower? Is there a snap ring visible at the rod guide? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login