Go Bottom

m-m M602

View my Photos
vince
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-14          83076


Anyone know approx. value of a M602, in use, with 7' box blade, pull behind bush hog. All very rusty and beat up, but can pull tree roots out of ground if not careful.

Thanks,
Newby to tractors




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



m-m M602

View my Photos
TomG
Join Date: Feb 2002
Posts: 5406 Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-14          83080


MM became a part of AGCO through the merger with White. There may be some support for the tractor through an AGCO dealer but it might be pretty slim pickins. According to Tractortips the tractor was made '63-'64 and there may have been only around 1,300 produced (there were both a gas and diesel models). Parts likely would be rare unless the engines and drive-trains components were also used in other tractors. I think the tractor is likely to have more value to a collector than to somebody who wants a working tractor.

The link below goes to a MM related site. ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



m-m M602

View my Photos
vince1
Join Date: Apr 2004
Posts: 1 western kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-22          83906


Thanks much for the help, TOMG,
That site advertises a M602 for $2,700 but doesn't say much about condition or equipment. This is the first one I've found but will keep looking. I sort of "inherited" my old tractor; it runs sweet but needs lots of TLC and knowledge; I'm mostly just a "small acreage home owner", semi-retired, and don't want to spend the hours needed to make it special.


....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login