Go Bottom

cutting left hand threads

View my Photos
tetloader
Join Date: Jan 2007
Posts: 9 between Calif and the Tetons
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-02-21          139932


Hey - I picked up a used Ridgid 600 power threader to make my life easier. It says that you can cut left hand pipe threads. Does that require a left hand diehead and/or left hand chasers? It uses Ridgid 11R dieheads and I can't find anything available in left hand. Any help is greatly appreciated !



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



cutting left hand threads

View my Photos
firedog
Join Date: Feb 2007
Posts: 6 Southeast Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-02-21          139934


best I could find. http://ridgid.com/Tools/Pipe-Threading-and-Fabrication
manual stated the 600 used 12R replacement dies.
looked under manual threading dies for LH dies. http://ridgid.com/Tools/Manual-Threader-Pipe-And-Bolt-Dies ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login