ARPS backhoe
dkpender
Join Date: May 2004 Posts: 3 Kansas |
2006-09-12 135124
Does anyone have any info on a small Arps 3 pt backhoe, that was built for Kubota in the 1980's? It has about a 40" boom and a 40" dipper, Kubota series KUW 200. It is a pretty light backhoe, I am needing the thrust washers for the pivot arc swing, but have no parts list or operators manual, so not sure where to start the search for info. Thanks
Reply to | Quote Reply | Add Photo
ARPS backhoe
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2006-09-12 135125
Arps is now Ameriquip, try their customer support people.
Best of luck.
....
Link: Ameriquip
 
Reply to | Quote Reply | Add Photo
ARPS backhoe
doclongshot
Join Date: Oct 2009 Posts: 3 Missouri |
2009-10-27 166590
Did you have any luck with this? I have the exact set of circumstances. thanks ....
Reply to | Quote Reply | Add Photo
ARPS backhoe
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2009-10-27 166591
The original poster only ever made one post, the one you see above.
Considering it was not only his singular post, but it's now 3 years old, I suspect you won't hear from him.
Follow the link in my previous post and contact the manufacturer.
Best of luck. ....
Reply to | Quote Reply | Add Photo
ARPS backhoe
dkpender
Join Date: May 2004 Posts: 3 Kansas |
2009-10-27 166592
Hi , Murf's advice is correct. I think they sent me a Kubota manual, but before I got that info I went to a bearing shop and i was able to modify a bronze sleave, worked great. I will be near where the little hoe and paper work are located , around the 2nd week in Nov. if that would be any help. Let me know. I could send you a PDF of the B670 Kubota hoe ....
Reply to | Quote Reply | Add Photo
ARPS backhoe
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2009-10-27 166593
Ok, I stand corrected, we did hear from him. :)
Best of luck. ....
Reply to | Quote Reply | Add Photo
ARPS backhoe
doclongshot
Join Date: Oct 2009 Posts: 3 Missouri |
2009-11-02 166669
Hi Thanks Murf, I used the information you supplied and have been in contact via e-mail with Ameriquip. They are going to send me some manuals.
Dkpender, any information you could send my way would be greatly appreciated. (IE PDF, part#'s,pictures, etc.). As I bought the backhoe disassembled and in crates and it appears not all of the crates.
Thanks to both of you for your time. ....
Reply to | Quote Reply | Add Photo
ARPS backhoe
dkpender
Join Date: May 2004 Posts: 3 Kansas |
2009-11-05 166749
Doclongshot, send me your email and I will send the pdf
dkpender pender@networksplus.net ....
Reply to | Quote Reply | Add Photo
Go Top
Share This