Digging in Shale with Backhoe
ncrunch32
Join Date: Dec 2003 Posts: 762 Kingston, NY Pics |
2004-09-13 96364
There is lots of shale in my neighborhood. I am helping a neighbor with a deck jambed up against a hill. We were clearing some ground to give him some room between the deck and the hill - it was easy going for 1/2 the job and then I hit shale with my 47 hoe on 4310 JD which slowed me to a crawl.
My wife tells me my daughter was great at finessing the shale when she dug a trench for me (in pics). Maybe that's what you need - just patience? Any hints on the best way to approach shale with a hoe? Or do I have to get out the old pick-axe? I hate shale :(
Reply to | Quote Reply | Add Photo
Digging in Shale with Backhoe
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2004-09-13 96367
Different strokes for different folks, in this case different ground types, LOL.
I have had the best success, and the least damage, by keeping the boom as vertical as possible and getting under the shale and then using the bucket curl against the bottom of the hole to pry upwards. This usually fractures it enough that the loose material can be scooped out easily. When you run out of loose material repeat the first part again.
Patience is critical, that or a REALLY big machine and just give'r ..... LOL
Best of luck. ....
Reply to | Quote Reply | Add Photo
Digging in Shale with Backhoe
ncrunch32
Join Date: Dec 2003 Posts: 762 Kingston, NY Pics |
2004-09-14 96407
Thanks for the advice Murf! Since I am not going to get a bigger machine I guess I'll just have to be patient and keep the pick-axe ready :) ....
Reply to | Quote Reply | Add Photo
Digging in Shale with Backhoe
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2004-09-17 96733
Here in southeastern Michigan we don't have shale, but we do have a lot of limestone which has to be excavated with explosives. In the winter we get frost from 4" to 18" thick---we use what are called "frost rippers" which is just a crescent-shaped shank about 24" long with a replaceable tooth. Some take the place of the bucket and some clamp to the bucket's cutting edge. You could probably make one out of 1" plate and weld a tooth on it. There are different types of teeth too---try ones that are split in the middle and look like a "Y"---they tend to be thinner and sharper to split apart/shatter things. ....
Reply to | Quote Reply | Add Photo
Digging in Shale with Backhoe
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-09-18 96759
Something I saw several years ago and I haven't thought to try but a fellow had turned the bucket backwards on a hoe to get the teeth under the edges and to pop it up to loosen the shale then went after it with the bucket turned in the normal way. It worked for him on his older unit (non-compact)TLB but I've not seen it done since or before then but it was working. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This