My Post Hole Digger won t dig
chase237
Join Date: Nov 2003 Posts: 5 |
2010-06-06 171365
Hi folks, I just pulled my PHD out of the barn, hooked it to my TC33D and all I get is a hole about a foot deep. In the past unless I hit rock, it's been smooth sailing.
Any ideas??? Help!!!!!
Thanks!
Reply to | Quote Reply | Add Photo
My Post Hole Digger won t dig
auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto Pics |
2010-06-06 171369
Park the auger over a void (at an embankment or something) to see how far down the hitch will lower it. ....
Reply to | Quote Reply | Add Photo
My Post Hole Digger won t dig
chase237
Join Date: Nov 2003 Posts: 5 |
2010-06-06 171372
I was thinking to do something like that. Thanks for the suggestion! ....
Reply to | Quote Reply | Add Photo
My Post Hole Digger won t dig
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2010-06-06 171378
Have you messed with the vertical links that go from the lift arms down to the lower arms? There is about 6" of travle which translates to about 28" or more travel depending where you start at.
Something may be binding or perhaps the swinging hitch is in the way. Also, if the PHD's 3pt pins have forced the lower arms out too far they hit and rest on the tires. My 33D has just a few inches of clearance with R4's.
Another thing to look for is a drive shaft that is damaged, not lubed, bent that will prevent the tubes from sliding and effectively become a stop. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This