Go Bottom

Jinma wood chipper

View my Photos
cotton
Join Date: Apr 2006
Posts: 4 tennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-05-19          129578


Someone who is familiar with Jinma 6" wood chipper: What engine rpm is needed to get enough pto rpm to operate this chipper? I have a Ford 3000 & I need some info before I purchase soon.
Thanx,
Cotton




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jinma wood chipper

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-19          129581


It runs at a standard 540 rpm. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jinma wood chipper

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-19          129582


Whoops, sorry, you were asking for engine rpm. I can't help you on that tractor. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jinma wood chipper

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-23          129729


The engine RPM which will spin the PTO at the proper speed (540 rpm) should be found in your owner's manual. I think on a 3000 it should be at about 1900 rpm.

Generally it is near (but less than) full throttle.

It depends greatly though on what you are chipping, and how big the power supply is. We often run small stuff through at much less than 540 without much problem.

Best of luck. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jinma wood chipper

View my Photos
cotton
Join Date: Apr 2006
Posts: 4 tennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-05-23          129743


Sounds like I have enough power & engine/pto rpm will be ok.
Thanks a lot. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jinma wood chipper

View my Photos
affordable
Join Date: Sep 2004
Posts: 93 Bellville,Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-26          129916


We just recieved a new load of the woodchippers in , if we can help you let me know

Tommy
Affordable Tractor Sales
....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login